Call Now : +91-8710011010Never Talk to a Robot

Cart

Know Your Size

KYS Finger Ring

AIM

  • To get the perfect fit for your Finger Ring from exquisite collections by Asimi Jewels.

 

 

 

 

 

NOTE: IF YOU KNOW YOUR FINGER RING CIRCUMFURANCE SIZE IN MILLIMETRE(MM) OR PERFECT SIZE IN OTHER STANDARDS LIKE USA, UK ETC YOU CAN SKIP TO THE CONCLUSION SECTION.

APPARATUS

Following are the material need to get the perfect fit of your Finger Ring:

  • Finger Ring Sizer by Asimi Jewels.
  • Click Here to download the Finger Ring Sizer by Asimi Jewels.

 PROCEDURE 1 (Step 1)

  • Print the Ring Sizer by Asimi Jewels on a A4 size paper.
  • While Printing in the “Print Settings” under “Page Sizing and Handling” select “Custom Scale” and enter “100%”.

NOTE: IF “100%’ SCALE IS NOT SELECTED YOU MIGHT GET A INCORRECT RING SIZE.

PS: CHECK THE RING SIZER WITH A SCALE FROM 40-80 MARKING TO CONFIRM IF IT IS 4CM IN TOTAL.

PROCEDURE 1.1 (Step 2)

  • Cut out the strap along the dotted lines.

 

 

 

 

 

 

  • Don’t forget to make a notch at the line marked as RING SIZE.

PROCEDURE 1.3 (Step 4)

  •  Take the end of the strap (one with an arrow) and put it in the notch.

 PROCEDURE 1.2 (Step 3)

  • Wrap the strap around your finger where you want the ring to be fit on. We suggest end divider line of the finger and palm. Just like a Finger Ring keeping the large box of Finger Ring Sizer like top of a finger ring.

PROCEDURE 1.4 (Step 5)

  • Pull the end through the notch to tighten the strap on your finger.
  • Tighten the strap on your finger in such a way that you can still rotate the strap on your finger smoothly.
  • PROCEDURE 1.5 (Step 6)

  • Mark the scaling with a pen, mark the number which is nearest to the notch.

RESULT

  • Voila!! The number on the Finger Ring Sizer nearest to the notch is  your finger ring size in mm, enter the same on Conclusion section to know the ring size for selection only on ASIMIJEWELS.COM

KYS as per Finger Ring Sizer

KYS as per International Standards

KYS Necklace

AIM

  • To get the perfect fit for your Necklace from exquisite collections by Asimi Jewels.

APPARATUS

Following is the material you need to get the perfect fit of your Necklace:

  • Procedure 1: 
  • Non-Strechable String(Thick Thread),
  • Pair of Scissors,
  • 12 Inch Ruler Scale.
  • Pen or Marker.

 PROCEDURE 1 (Step 1)

  • Take a Non-Strechable String at least 48inches long.

PROCEDURE 1.1 (Step 2)

  •  Take the 2 end of the string and match them.

PROCEDURE 1.2 (Step 3)

  • Tie a simple knot to join the two end of the string.

PROCEDURE 1.3 (Step 4)

  •  Take the one end of the loop of string (one without a knot) and put it on start of a scale.

PROCEDURE 1.4 (Step 5)

  • Keeping the start of the loop of string at 0 of scale, start marking the length of the string at 16inches, 18inches, 20inches, 22inches, 24 inches. you can also just mark only a desired length to check exactly how a necklace will fit on your neck.
  • PROCEDURE 1.5 (Step 6)

  • Wrap the marked loop of string around your neck keeping the start point/loop of string (one without a knot) on your right collar-bone.
  • Take one end of the loop of  string without a knot and insert two fingers in between the two single strings.
  • Take the other end of the loop of string one with a knot and pass it through the gap in between the two single strings.

RESULT

  • Pull one end of the loop of string(one with a knot) through the loop till the start point reaches your first marking of 16inches.

Conclusion

Voila!! The marking resemble the fit of a Necklace/Chain length you order from Asimi Jewels

  • This Image resembles the fit of 16inches Necklace/Chain for the model in the image. Similarly you can judge the perfect fit of your necklace.

 

  • This Image resembles the fit of 18inches Necklace/Chain for the model in the image. Similarly you can judge the perfect fit of your necklace.

 

  • This Image resembles the fit of 20inches Necklace/Chain for the model in the image. Similarly you can judge the perfect fit of your necklace.

 

 

 

  • This Image resembles the fit of 22inches Necklace/Chain for the model in the image. Similarly you can judge the perfect fit of your necklace.

 

 

 

  • This Image resembles the fit of 24inches Necklace/Chain for the model in the image. Similarly you can judge the perfect fit of your necklace.

 

 

 

  • This Image resembles the fit of 26inches Necklace/Chain for the model in the image. Similarly you can judge the perfect fit of your necklace.

KYS Armlet

AIM

  • To get the perfect fit for your Armlet from exquisite collections by Asimi Jewels..

APPARATUS

Following is the material you need to get the perfect fit of your Armlet:

  • Procedure 1:
  • Tailor’s Flexible  Measuring Tape

 

 

 

 

 

 

  • Procedure 2: 
  • Non-Strechable String(Thick Thread),
  • Pair of Scissors,
  • 12 Inch Ruler Scale.
  • Pen or Marker.

 PROCEDURE 1 (Step 1)

  • Take a Tailor’s Flexible Measuring Tape, and wrap around your Arm.(As Shown in Picture)
  • Mark the scaling with a pen/marker where the start point meets the measure when the tape wrapped around your Arm is tight.

NOTE: TIGHT BUT COMFARTABLE!

  • Take a  note of the measurement which you marked on the measuring tape.

Example in Picture shows 9.3 inches as per the model’s Arm size.

If you have used Procedure 1 you can skip to the RESULTS section now.

 PROCEDURE 2 (Step 1)

  • Take a Non-Strechable String at least 30inches long.

PROCEDURE 2.1 (Step 2)

  •  Take the 2 end of the string and match them.

PROCEDURE 2.2 (Step 3)

  • Tie a simple knot to join the two end of the string.
  • PROCEDURE 2.3 (Step 4)

  • Keep the loop of the string on a table, and place your wrist above the string.

 

 

 

 

 

  • Take one end of the loop of  string without a knot and insert two fingers in between the two single strings.

 

 

 

 

 

  • Take the other end of the loop of string one with a knot and pass it through the gap in between the two single strings.

 

 

 

 

 

 

  • Pull the loop of string upwards to your arm and Tighten the loop of string on your Arm.(As shown in the Image)

 

 

NOTE: TIGHT BUT COMFORTABLE!

Procedure 2.4 (Step 5)

  • Mark the string where end of loop of string meets each other when wrapped around your Arm.
  • Preserve the marked out loop of string on your waist for further step(s).

 

 

 

 

 

 

 

  • Cut the string where end of loop of string meets each other when wrapped around your Arm.
  • Preserve cutted out loop of string on your Arm for further step(s).

RESULT

PROCEDURE 1

  • Voila!! The measurement in inches on the tape is your Arm size skip to the Conclusion page now to note down the perfect fit for you Armlet.

 

 

 

 

 

 

 

 

PROCEDURE 2

  • Voila!! The measurement in inches of the loop of the string  is your Arm size skip to the Conclusion page now to note down the perfect fit for you Armlet.

Step 8

 

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

KYS Bracelet

AIM

  • To get the perfect fit for your Bracelet from exquisite collections by Asimi Jewels..

APPARATUS

Following is the material you need to get the perfect fit of your Bracelet:

  • Procedure 1:
  • Tailor’s Flexible  Measuring Tape

 

 

 

 

 

 

  • Procedure 2: 
  • Non-Strechable String(Thick Thread),
  • Pair of Scissors,
  • 12 Inch Ruler Scale.
  • Pen or Marker.

 PROCEDURE 1 (Step 1)

  • Take a Tailor’s Flexible Measuring Tape, and wrap around your wrist like a watch.
  • Mark the scaling with a pen/marker where the start point meets the measure when the tape wrapped around your wrist is tight like a watch/bracelet

 

NOTE: TIGHT BUT COMFARTABLE!

PROCEDURE 1.1 (Step 2)

  • Take a  note of the measurement which you marked on the measuring tape.

Example in Picture shows 5.5inches as per the model’s wrist size.

If you have used Procedure 1 you can skip to the RESULTS section now.

 PROCEDURE 2 (Step 1)

  • Take one end of a Non-Strechable String and wrap around your wrist like watch 4 times.
  • Cut the other end with a scissor as shown in the image.

PROCEDURE 2.1 (Step 2)

  •  Take the 2 end of the string and match them.

PROCEDURE 2.2 (Step 3)

  • Tie a simple knot to join the two end of the string.
  • PROCEDURE 2.3 (Step 4)

  • Keep the loop of the string on a table, and place your wrist above the string.

 

 

 

 

 

  • Take one end of the loop of  string without a knot and insert two fingers in between the two single strings.

 

 

 

 

 

  • Take the other end of the loop of string one with a knot and pass it through the gap in between the two single strings.

 

 

 

 

 

 

  • Tigten the loop of string on your wrist like a watch.

 

 

NOTE: TIGHT BUT COMFORTABLE!

Procedure 2.4 (Step 5)

  • Cut the string where end of loop of string meets each other when wrapped around your wrist like a watch.
  • Preserve cutted out loop of string on your wrist for further step(s).

RESULT

PROCEDURE 1

  • Voila!! The measurement in inches on the tape is your wrist size skip to the Conclusion page now to note down the perfect fit for you Cuff & Link/Chain Bracelets.

 

 

 

 

 

 

 

 

PROCEDURE 2

  • Voila!! The measurement in inches of the loop of the string  is your wrist size skip to the Conclusion page now to note down the perfect fit for you Cuff & Link/Chain Bracelets.

Step 8

 

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

KYS Waist Chain

AIM

  • To get the perfect fit for your Waist Chain from exquisite collections by Asimi Jewels..

APPARATUS

Following is the material you need to get the perfect fit of your Waist Chain:

  • Procedure 1:
  • Tailor’s Flexible  Measuring Tape

 

 

 

 

 

 

  • Procedure 2: 
  • Non-Strechable String(Thick Thread),
  • Pair of Scissors,
  • 12 Inch Ruler Scale.
  • Pen or Marker.

 PROCEDURE 1 (Step 1)

  • Take a Tailor’s Flexible Measuring Tape, and wrap around your waist like a belt.
  • Mark the scaling with a pen/marker where the start point meets the measure when the tape wrapped around your waist is tight like a belt.

NOTE: TIGHT BUT COMFARTABLE!

  • Take a  note of the measurement which you marked on the measuring tape.

Example in Picture shows 28 inches as per the model’s waist size.

If you have used Procedure 1 you can skip to the RESULTS section now.

 PROCEDURE 2 (Step 1)

  • Take a Non-Strechable String at least 60inches long or approximately 2.5 times of your waist size.

PROCEDURE 2.1 (Step 2)

  •  Take the 2 end of the string and match them.

PROCEDURE 2.2 (Step 3)

  • Tie a simple knot to join the two end of the string.
  • PROCEDURE 2.3 (Step 4)

  • Wrap the loop of string around your waist like a belt, keeping both the ends in front to observe and proceed to the next step(s).

 

 

 

 

 

 

 

  • Take one end of the loop of string without a knot and insert two fingers in between the two single strings. Take the other end of the loop of string one with a knot and pass it through the gap in between the two single strings.

 

 

 

 

 

 

  • Tighten the loop of string on your waist like a belt.

 

 

 

 

 

 

NOTE: TIGHT BUT COMFORTABLE!

Procedure 2.4 (Step 5)

  • Mark the string where end of loop of string meets each other when wrapped around your waist like a belt.
  • Preserve the marked out loop of string on your waist for further step(s).

 

 

 

 

 

 

  • Cut the string where end of loop of string meets each other when wrapped around your waist like a belt.
  • Preserve cutted out loop of string on your waist for further step(s).

RESULT

PROCEDURE 1

  • Voila!! The measurement in inches on the tape is your waist size skip to the Conclusion page now to note down the perfect fit for you Waist Chain.

 

 

 

 

 

 

 

 

PROCEDURE 2

  • Voila!! The measurement in inches of the loop of the string  is your waist size skip to the Conclusion page now to note down the perfect fit for you Waist Chain.

Step 8

 

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

KYS Anklet

AIM

  • To get the perfect fit for your Anklet from exquisite collections by Asimi Jewels..

APPARATUS

Following is the material you need to get the perfect fit of your Anklet:

  • Procedure 1:
  • Tailor’s Flexible  Measuring Tape

 

 

 

 

 

 

  • Procedure 2: 
  • Non-Strechable String(Thick Thread),
  • Pair of Scissors,
  • 12 Inch Ruler Scale.
  • Pen or Marker.

 PROCEDURE 1 (Step 1)

  • Take a Tailor’s Flexible Measuring Tape, and wrap around your ankle below malleolus(round ball-like bone) .
  • Mark the scaling with a pen/marker where the start point meets the measure when the tape wrapped around your ankle is tight.

NOTE: TIGHT BUT COMFARTABLE!

  • Take a note of the measurement which you marked on the measuring tape.

Example in Picture shows 9 inches as per the model’s ankle size.

If you have used Procedure 1 you can skip to the RESULTS section now.

 PROCEDURE 2 (Step 1)

  • Take a Non-Strechable String at least 24inches long.

PROCEDURE 2.1 (Step 2)

  •  Take the 2 end of the string and match them.

PROCEDURE 2.2 (Step 3)

  • Tie a simple knot to join the two end of the string.
  • PROCEDURE 2.3 (Step 4)

  • Wrap the loop of string around your anklet below malleolus, keeping both the ends in front to observe and proceed to the next step(s).

 

 

 

 

 

 

 

 

  • Take one end of the loop of string without a knot and insert two fingers in between the two single strings. Take the other end of the loop of string one with a knot and pass it through the gap in between the two single strings.

 

 

 

 

 

 

 

  • Tighten the loop of string on your ankle.

 

 

 

 

 

 

NOTE: TIGHT BUT COMFORTABLE!

Procedure 2.4 (Step 5)

  • Cut the string where end of loop of string meets each other when wrapped around your Ankle.

 

 

 

 

 

 

 

 

  • Preserve cutted out loop of string on your ankle for further step(s).

RESULT

PROCEDURE 1

  • Vola!! The measurement in inches on the tape is your Ankle size skip to the Conclusion page now to note down the perfect fit for you Anklets.

 

 

 

 

 

 

 

 

PROCEDURE 2

  • Vola!! The measurement in inches of the loop of the string  is your Ankle size skip to the Conclusion page now to note down the perfect fit for you Anklets.

Step 8

 

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Test Mode

 

We are running on test mode orders placed on COD will be cancelled.
Please do not enter any kind of actual card details or netbanking credentials on checkout page.

Profiles/Login details you use can be used to access again once the site is live.
Please write your reviews on the test website to: info@asimijewels.com